Babeland Official Store, Clone-A-Willy Kit, Vibrators, 03 410 00
  • Babeland Official Store, Clone-A-Willy Kit, Vibrators, 03 410 00
  • Babeland Official Store, Clone-A-Willy Kit, Vibrators, 03 410 00
  • Babeland Official Store, Clone-A-Willy Kit, Vibrators, 03 410 00

Clone-A-Willy Kit

$42.00

Item #: 03 410 00
Add to Bag
OUT OF STOCK
This product is currently unavailable but should
be back in stock shortly, so come back soon!

Make your own high-quality, vibrating silicone dildo, using any available penis as a model, with the Clone-a-Willy Kit. Imagine the possibilities - double-penetration, long-distance relationships (add a phone call, and it's the next best thing to being there), or just plain old fun with a replica of your favorite penis. Includes mold casting materials, silicone powder, instructions, and a small slimline vibe to create a vibrating dildo. Perfect for couples. Craft night has never, ever been this much fun. Silicone and ABS Hard Plastic. Available in peach tone. Vibrator uses one AA battery.

May We Suggest

  • Babeland Official Store, BLND-3775 Sqweel 2, babeland.com Sqweel 2 $47.20 - $59.00
  • Babeland Official Store, BLND-1180 Jimmyjane Eternity, babeland.com Jimmyjane Eternity $2,750.00 - $3,250.00
  • Babeland Official Store, BLND-1321 Boss Naked, babeland.com Boss Naked $69.00
  • Babeland Official Store, BLND-2480 Babeland Silver Bullet, babeland.com Babeland Silver Bullet $15.00

REVIEW SNAPSHOT®

by PowerReviews
Babeland Clone-A-Willy Kit
 
3.9

(based on 7 reviews)

Ratings Distribution

  • 5 Stars

     

    (3)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

86%

of respondents would recommend this to a friend.

Reviewed by 7 customers

Sort by

Displaying reviews 1-7

Back to top

(2 of 2 customers found this review helpful)

 
3.0

like it but caveats

By perversej

from Chicago

About Me Budget Buyer

Verified Reviewer

Pros

  • Fun
  • Pretty easy
  • Silly

Cons

  • Not durable
  • Tricky

Best Uses

    Comments about Babeland Clone-A-Willy Kit:

    It was not hard to do, if you can read and follow directions well. Do some homework, read reviews and tips around the net. There are a lot of good ideas out there.

    a couple things:

    a partner (fluffer) is indispensable. Don't try without help, even if you successfully make a mold it won't be as big as you usually are. Two partners would be better--one to mix and one to fluff;

    a stick blender really helps. I'm pretty sure I would have totally failed without mine. Get it all set up before you pour water in and the clock starts ticking;

    don't shove your cock too hard into the material. It has some resistance and it will force blood back into your body. You'll come out bigger if you ease it in, I think;

    The material doesn't really harden that well. If you leave it on a flat surface it will get flat spots. If you leave it on top of a wire or something, the wire will leave a permanent groove. This is why it got 3 stars instead of four from me. Store it standing up, I guess.

    (1 of 1 customers found this review helpful)

     
    1.0

    Nice idea, impractical

    By Anon

    from USA

    Comments about Babeland Clone-A-Willy Kit:

    *From Babeland Customer Service - Thanks for your feedback. We do test all of our products before we sell them, and we had nothing but positive experiences with this one; we've also heard positive feedback from our customers. We're sorry it didn't work for you, but rest assured, we wouldn't sell something that we know to be poor quality or unusable. Please give us a call if you'd like to chat about different toy options. Thanks again!* Neat idea. Worked hard with my wife to get it right. No go. You have like 2 mins. to do a laundry list of things and it is simply impractical. No wonder it is sold as a novelty". My only other question is: Why would Babeland sell such a thing when it really is not reliable or practical. This is the only purchase of many from Babeland where I think they get a deservedly bad wrap for selling something that is clearly inferior. A waste of money as far as we are concerned."

     
    4.0

    awesome, with a couple caveats

    By Anon

    from USA

    Comments about Babeland Clone-A-Willy Kit:

    All of the other reviewers' comments on the timing, awkwardness etc. are right on. But this is a fun, hilarious craft project. My only comments to add are use a cock ring (I ended up with a great final product, but it was about 3/4 the size it could have been if we'd used a cock ring to keep my partner hard). Also, just a note that the silicone dries pretty hard, so the final product isn't very flexible, so I wouldn't say it feels like the real thing.

     
    4.0

    Gel set too fast for me!

    By Anon

    from USA

    Comments about Babeland Clone-A-Willy Kit:

    My first effort was a complete failure, but the fault was my own and I wanted to try to give some tips in the hope that others won't repeat my mistakes. First, get everything completely ready and work in a place that can be easily cleaned up. Second, you really should have someone else there to help, it's a logistics challenge to get everything mixed, poured, and timed while trying to stay hard! Don't worry too much about mixing up the first powder, it sets up REALLY fast and you need to be inside the mold well before two minutes. This is where I failed, I was ready just before the two minute mark, but the gel was too solid to get into. Cooler water should give you more time here, I am going to try again with a cooler water temp. The tube you stick yourself into is not going to fill up completely with gel before you stick yourself in it, even though you cut it to fit your length. This made me stop and think for a few moments I didn't have to spare. Remember, you are going to be displacing the gel so it's ok that it doesn't fill the tube. Overall, it is not a difficult process, except that it is very quick once started and it was not easy to stay erect while stressing about how the clock was running. I will get the refill kit and try again, now that I've learned my lesson.

     
    5.0

    Great Craft for a Rainy Day!

    By Kat

    from Seattle, WA

    See all my reviews

    Comments about Babeland Clone-A-Willy Kit:

    My husband and I had so much fun making our very own dildo. I would recommend this as a fun and sexy craft project. I wouldn't use the kit unless I was really comfortable with the other person though, it requires a lot of awkward multitasking. Besides from the process think about the endless possibilities of having your man's replica in the bedroom, DP, makes oral even better...and so on. It also is a bit of an ego boost for your man and, makes masturbation even more fun. The Clone-A-Willy is a win-win.

    (1 of 1 customers found this review helpful)

     
    5.0

    loven it!

    By OAKLANDISH

    from USA

    Comments about Babeland Clone-A-Willy Kit:

    This is the best toy ever! I love toys, but a personalized toy replica of your lover! OMG! My partner and I had a blast making it, and now when he's away we have hot n steamy cybersex! I also think of it as a wonderful keepsake... (he autographed it and dated it!) hehe... :) EVERYONE SHOULD TRY THIS AT LEAST ONCE IN THEIR LIFE!!!!!!!!!!!!!!!!!!!!!!

    (1 of 2 customers found this review helpful)

     
    5.0

    Tried and True

    By Audrey

    from Oakland, Ca

    See all my reviews

    Comments about Babeland Clone-A-Willy Kit:

    I am a fan of the Clone-a-Willy. I have tried it twice, the second time I got the kit in silicone from Babeland. Since the first time I tried making a Willy I had a few questions, I wanted to share my pointers: 1) I suggest you make the Willy with a person you are very comfortable with. 2) Read the instructions (thoroughly) 3) Gather all the components before beginning 4) Have the water running on low, adjusting the temperature until it is right, then leave it on while you prep the cock. 5) The mold sets quickly so you have to move fast once your partner's cock is hard. (steps for mixing plaster, pouring it into molding tube and putting cock into molding plaster) 6)Keep you cock in the mold for 2 minutes but let the mold set for 24hours to dry 7) Be sure to mix silicone really well before pouring into mold and tap your mold to remove any air bubbles. I had a lot of great toys in my life but this one has a special place!

    Displaying reviews 1-7

    Back to top